CNC Cut Flat Pack Arcade Machine

Austin Amusements

  • $750.00

New for Austin Amusements is our CNC Arcade Machine.

These are brand new at Austin Amusements so please contact us for more details.

Our flat packs are professionally CNC (Kitchen grade MDF, not chip board like othjer sellers)  cut right here in Australian. Designed to easily slot together for quick assemble.

Check out our assembly guide. This was completed at my house when I had COVID and wasn't in the best shape! Note, I am 2.03 metres tall, hence the machine isn't as small as it may look.

Three ways to assemble these cabinets:

1) The cabinet comes with pre-cut locator tabs which slot in place and only requires glue and a large pair of clamps to hold the machine together tightly while the glue is drying (the pre-cut tabs are a tight fit and the cabinet stays together without glue but it would not be recommended to leave it this way).

If you don't have clamps, no problem.

2) You can also add glue, place all pieces together with glue in the slots. Add weight to the top piece of the cabinet and let the glue dry. Once the glue is dry, add small L type brackets. Screw the brackets in place for extra support and to firmly hold the panels together. Not every piece will require a bracket, maybe 3-4 on each side to hold the pieces tightly together.

3) The cabinet can also be screw together from the outside and you can counter sink the screws. Fill the screw holes with bog and sand flat. Decals can then be used to cover counter sunk screws. If you don't wish to apply decals and are happy with a white cabinet buy screws with white caps. Once the screws are in place put the cap on and you are done.

Our flat pack is a two player lowboy style arcade machine with 6 buttons holes per player, plus holes for the player 1 and 2 start buttons and 2 additional holes for credit buttons.


The machine will fit up to a 27in screen. We recommend either a 24in or 27in. 

Cabinet size:

Height 1495mm

Width: 650mm

Depth: 630mm at the longest point (control panel)

Control panel height: Control panel sits at approximately 919mm (add 30-40mm with wheels)

Whats our price?

Contact Austin Amusements and we can work you out a price if what you need is not listed below.

Pack 1)

DIY flat pack - wood only (no routing for t-moulding) $560 each 


DIY flat pack - wood and L brackets $590 each (L brackets are nothing special buy them yourself from Bunnings, its cheaper for you and it saves us a trip to Bunnings!).

Wood is not routed for t-moulding.

Pack 3)

DIY flat pack - wood, perspex header, perspex screen cover, routed to fit t-moulding (2.38mm router bit), 12 x L brackets $750 each.

Pack 4) 

plus 11 metres of black 17.5mm lipped t-moulding $790.00 each

Contact Austin Amusements with your requirements and we will quote a price.

*Assemble does require a little work but it is not that hard. We feel it is VERY easy to assemble, but if you have very limited woodworking skills and no access to a file, rubber mallet, clamps and glue, it may not be for you. You will require a few simple tools to put the machine together. In my experience an IKEA flat pack is harder to assemble!

* Delivery prices:

Please Contact Austin Amusements for a delivery price. The flat pack is large and heavy, hence delivery could be expensive depending on your location. We recommend pick up as the best option from our Sydney warehouse.

We Also Recommend